Introduction to Common Metal Mesh Belt Categories

Introduction to Common Metal Mesh Belt Categories
Metal mesh belts can be divided into eight categories - sheet metal mesh belts - chain rod mesh belts - eye-shaped mesh belts - crankshaft-shaped mesh belts - straight-shaft-shaped mesh belts - flat wire-shaped mesh belts - type B mesh belts - herringbone mesh belts.

Metal mesh belts are classified and can be divided into eight categories:
The first category, sheet metal mesh belts: also known as the Great Wall mesh, is composed of flat metal sheets and round metal wires. The mesh belt has a light weight, large mesh gaps, a flat mesh surface, and runs smoothly without deviation. It can be used as a conveyor line for washing, drying, cooling, and heat treatment.
The second category, chain rod mesh belts: This chain rod mesh belt uses chain drive and is suitable for large and heavy transmissions. It has stable movement, strong power, and relatively small force on the mesh surface. It can protect the conveying mesh surface. It is more expensive, but has a long service life.
The third category, eye-type mesh belt: sprocket drive, stable operation, strong bearing capacity, can transport high-speed heavy objects, smooth surface, suitable for the transportation of unstable products, large opening rate, good ventilation and dehydration, easy to clean, the eyeglass mesh belt is very suitable for the coating operation process due to its large holes, so that it can minimize contact with the conveyor belt.
The fourth category, crankshaft mesh belt: it concentrates the various advantages of metal wire woven mesh belt. Due to the deep curved string, the position of each spiral coil is correctly positioned, thus minimizing the deformation and extension of the mesh belt.
The fifth category, straight axis mesh belt: it is composed of alternating left and right mesh strips connected by straight strings. This series of mesh belts has dense meshes and uniform mesh spacing, which can make the mesh belt run smoothly. This series of mesh belts is suitable for conveyor lines with small carrying volume and relatively heavy texture.
The sixth category, flat wire mesh belt: this mesh belt is made of rolled flat wire. It is connected with a crankshaft type threading strip to correctly position the position of each spiral coil, thus minimizing the deformation and extension of the mesh belt. The seventh category, type B mesh belt: also known as trapezoidal mesh belt or straight
mesh, this mesh belt is usually a gear transmission mesh belt, which has the advantages of good air permeability, uniform tension, fine workmanship, flexible rotation, good stability, high temperature resistance, pressure resistance, corrosion resistance, long life, etc.
The eighth type, herringbone mesh belt: It is made of mesh strips that alternate left and right and are connected by four straight strings. The precise weaving technology makes the mesh belt have the characteristics of high density, fine mesh and flexible operation. It has extremely high requirements on materials and weaving technology. This mesh belt is suitable for conveying lines with small loads.