Teflon coated steel wire mesh, Teflon steel wire mesh, non-stick coating steel wire mesh product types

Teflon coated steel wire mesh is also known as Teflon sprayed steel wire mesh, Teflon steel wire mesh, anti-stick steel wire mesh, Teflon steel wire filter mesh, Teflon coated steel wire mesh, steel wire Teflon mesh, non-stick coating steel wire mesh, etc.

Introduction to the spraying of Teflon wire mesh

(I) The raw materials are mainly American Dupont, Whitford and Japanese Dakin coatings, and Korean high-temperature ceramic coatings have been developed successively.

(ii) Fluoroplastic spraying:
    (1) Anti-corrosion of chemical equipment: filters, reactors, centrifuges, filter plates, stirring rods, floats, mixers, liquid level gauges and other chemical accessories.
    (2) Anti-corrosion of chemical machinery: mainly centrifuges and dryers.
    (3) Anti-corrosion of chemical pipelines and valves: suitable for various chemical accessories.
(iii) Special industries
    (1) Salt spray corrosion resistance: usually used on salt spray corrosion-resistant workpieces in marine operations and petroleum machinery.
    (2) Anti-static spraying: used in special industries that require anti-sticking, wear-resistant and anti-static properties, such as dryers.
    (3) Insulation spraying: using insulating paint to spray on the workpiece to make the workpiece have insulating properties, such as motor brackets.
(iv) Teflon tight lining

Teflon has the following advantages:
    (1) Non-stickiness: Almost all substances do not adhere to Teflon. Even very thin films show good non-stick properties.
    (2) Heat resistance: Teflon has excellent heat and low temperature resistance. It can withstand high temperatures up to 300°C for a short period of time, and can generally be used continuously between 240°C and 260°C. It has significant thermal stability. It can work at freezing temperatures without becoming brittle, and does not melt at high temperatures.
    (3) Teflon has a low friction coefficient. The friction coefficient changes when the load slides, but the value is only between 0.05 and 0.15.
    (4) Moisture resistance: The surface of Teflon does not stick to water and oil, and it is not easy to stick to solutions during production operations. If there is a small amount of dirt, it can be removed by simply wiping. The downtime is short, saving work hours and improving work efficiency.
    (5) Wear resistance: It has excellent wear resistance under high loads. Under certain loads, it has the dual advantages of wear resistance and non-stickiness.
    (6) Corrosion resistance: Teflon is almost immune to corrosion by chemicals and can protect parts from any type of chemical corrosion.

(V) Teflon's non-stick, wear-resistant and self-lubricating properties
    (1) Rubber and plastic industry: metal molds for rubber and plastic products (shoe molds, ball molds, EVA molds, glove molds, blister molds, styrofoam molds, three-ply hot pressing molds, etc.).
    (2) Textile industry: guide wheels, embossing wheels, laminating wheels, dyeing and finishing wheels, sizing wheels, non-woven wheels and their parts for textile and leather machinery.
    (3) Food industry: food machinery, biscuits, bread, candy baking trays, etc.
    Automobile industry: pistons, piston rings, throttle shafts, joysticks, hinge pins, various bearings, brake shoes, bearing retainers, guide valve seats, mixing chamber throttle valves, etc.
    (4) Other industries: scissors, circular saws, gas switches, ball valves, bicycle brake lines, scrapers, copper knives, blades, screws, nuts, etc.